CNCRT 56: When Should I Buy A CNC Router Table

CNC Router Tips Podcast Episode 56

Bill Griggs answers a listener's question, "When Should I Buy A CNC Router Table? Before or after I retire?" Should you Buy a CNC Router table while you are still gainfully employed or should you wait until after you have retired and still have an income. The answer may surprise you.

When you decide to Buy a CNC Router Table you need to also decide why you want to Buy a CNC Router Table. Most people fall into one of two categories of CNC Router table buyers. In this episode we discuss what those two types of buyers are and how they are different.

New in the shop is the Pierson Workholding Mini Pallet System. Here is the description used on the Pierson Workholding website. "The Mini Pallet System (MPS) is designed for the startup machinist where less aggressive machining and smaller work envelopes are the norm. The system is still built with the same robust components found in our flagship Pro Pallet System but with a lower starting price and simplified design. Choose from two pallet sizes - 6" x 10" or 8" x 14".

Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/56

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.

The Makers Guide http://themakersguide.com

#CNC Router Tips https://www.facebook.com/groups/cncroutertips

Pierson Workholding Tour https://www.youtube.com/watch?v=B8MQhX3QPEE
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny 
NYCCNC https://www.nyccnc.com/