CNC ROUTER TIPS IS BACK

CNC Router Tips Podcast Episode 64

CNCRT64: CNC Router Tips Is Back

It has been a while but CNC Router Tips is back. In this episode we discuss the many changes and adventure that we have been working through since the last episode. Bill Griggs went back to school to study Entrepreneurship and grow his CNC Router Table Business. While this has been going on Bill learned  a bunch about things he was doing wrong and how to do things better.

I have been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors. We discussed the CentroidCNC Acorn in Episode 54. 

The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips

Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/64

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.

CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html

Mark Lindsay CNC https://marklindsaycnc.com

SmartScreens https://ngeneyes.com/smartscreen/licensing/

SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com

For some people, the thought of quitting their day job to pursue the entrepreneurial life is exhilarating. For many others, it’s terrifying. After all, a stable job that delivers a regular paycheck is a blessing. Not everyone has the means or the desire to take on the risks and responsibilities of working for themselves.

But what if we could quickly and easily create an additional stream of income without giving up the security of a full-time job? Enter the Side Hustle.

Chris Guillebeau's new book, Side Hustle: From Idea to Income in 27 Days, is out!